Kiçik İT otaqları üçün aşağı qiymətli uzaqdan ətraf mühitin monitorinqi bölməsi. Temperatur, rütubət, gərginlik, sızma, tüstü, hava axını və digər parametrlərə nəzarət edə bilir. O, həmçinin I/O nəzarətçisi kimi istifadə olunur (məsələn, qapı nəzarəti, fanatlar, generator, idarəetmə panelləri, UPS, elektrik açarları və həyəcan siqnalları). Siqnal siqnalı verə, sireni aktivləşdirə, e-poçt bildirişi göndərə və ya SNMP Trap göndərə bilər. 100-ə qədər fiziki sensora nəzarət edə bilər. 700-ə qədər müxtəlif elementdən istifadə edə bilər - bildirişlər, tetikler, taymerlər, məntiq sxemləri, sensorlar və quru kontaktlar. Virtual sensorlar, məntiq sxemləri, müxtəlif növ bildirişlər və idarəetmə panelləri ilə daxili veb interfeysinə malikdir. HTTP, HTTPS, SNMP v1, 2c, 3, SMTP, Radius, Syslog, FTP, DHCP və OpenVPN müştəri kimi daxili serverlər və agentlər var.

The unit is used for environmental monitoring (e.g. temperature, humidity, voltage, leakage, smoke, airflow). It is also used as an I/O controller (e.g. door control, fans, generator, control panels, UPS, circuit breakers, and alarms). Can use up to 1000 different elements - notifications, triggers, timers, logic schemes, sensors, and dry contacts. Has a built-in Web interface with virtual sensors, logic schemes, different types of notifications, and control panels. Has a slot for an LTE modem for an ethernet connection reservation.

The VT336 / Industial Monitoring Unit can be used for remote environmental monitoring in industrial settings:

• Monitoring: Measures temperature, humidity, voltage, access, smoke, dust, vibration, access, leakage, movement, airflow.
• I/O Controller: 4 analog Plug and Play inputs, CAN input, 10 dry contacts IN and 5 OUT, 2 relays 12V, SD, USB.
• Scalability: Supports up to 1000 elements, including sensors, virtual sensors, logic, notifications.
• Built-in Web Interface: 100Mbit/s, IPv4, IPv6 by demand.
• Extensions: 4G modem, Modbus.
• Notifications: Telegram, mail; VPN, SMS and voice call in case of 4G modem built-IN.
• Processor: 720Mhz dual-core Cortex-A7,  128Mbit RAM

The VT408 expansion module increases the number of analog sensors that can be connected to any Vutlan monitoring device.
Each module adds 8 analog sensor ports, providing greater scalability when monitoring complex environments. 

• All connected sensors are automatically detected and integrated into the system. CAN devices can be connected in a chain. 

Dual humidity and temperature sensor

The VT540 Vibration Sensor is designed to detect and monitor vibrations when installed on surfaces such as walls or windows.

This plug-and-play sensor easily connects to any analog port of Vutlan monitoring devices.

The maximum amount of sensors can be extended using the VT408 / Sensor extension unit.

The VT572 Radar detector is designed to detect unidentified objects and people on the territory. The scanning signal can pass through plastic, glass, ceiling, wooden doors and thin concrete walls.

This plug-and-play sensor easily connects to any analog port of Vutlan monitoring devices.

The maximum amount of sensors can be extended using the VT408 / Sensor extension unit.

VT593 Spot Leak Sensor detects water by measuring an increase in capacitance between two metal poles on the spot, all housed within a durable plastic casing. Unlike traditional metal-based sensors, it resists corrosion over time thanks to the low applied voltages and non-corrosive detection method.
This plug-and-play sensor easily connects to any analog port of Vutlan monitoring devices.
The maximum amount of sensors can be extended using the VT408 / Sensor extension unit.

The VT7670/ 4G modem supports receiving and sending SMS messages via 2G, as well as providing Ethernet connectivity over LTE (4G).
Supports network redundancy; if the LAN connection fails, the module automatically switches to LTE 4G to maintain the Ethernet connection.
This plug-and-play board is inserted into the modem slot of Vutlan monitoring units.

Needed for connection of analog, CAN, and 1-Wire sensors on long distances. Straight pin 5m RJ11 cable assembly. Available lengths: 3m, 5 m; 7m, 10m, 15m, 20m cables.

Needed for connection of different sensors on long distances or for 1-wire bus prolongation. Straight pin RJ11 cable assembly. Available lengths: 3m, 6m, 10m, 15m cables.

720P HD, Dome, USB, IR Camera 2.0&1.1 UVC,  1.0 megapixel, Cable length 5m.

The KMS-30 Magnet Sensor is essential for access control and is designed to monitor the status of doors and windows (open or closed). It consists of two parts: a magnet and a sensor. 
This sensor easily connects to any dry contacts connector of Vutlan monitoring devices.
The length of the connected cable is 1.8 meters.

CAN-12V-1A supplies power for each additional group of 12 CAN devices (sensors and extensions).
CAN devices and sensors can be chained together.

The VT-ACCU backup power supply board is an expansion module designed to ensure continuous operation of Vutlan monitoring units. It charges when the unit is powered and automatically provides backup power when the input voltage drops. Once power is restored, the batteries begin charging, ensuring constant readiness for operation.
Compatible with monitoring systems like VT604t,  VT825t and VT855t

The VT410 / DC voltage monitor The converts measured DC voltage into a format compatible with the Vutlan monitoring system.

Voltmeters with ranges of 0-10, 0-15, 0-75 V are available for sale. The accuracy is ± 1%. This plug-and-play sensor easily connects to any analog port of Vutlan monitoring devices.

The maximum amount of sensors can be extended using the VT408 / Sensor extension unit.